Distance from 12" below Waterline to Bow of Frame

• Start measuring at the bow 12" below the waterline
• Measure up and over the top of bow to where the frame begins
• Write this measurement in Square on your Dry-Dock Cover form

Width of Dry-Dock Cover, Port to Starboard

• Start measuring 12" inches below the port waterline
• Measure up and over the first rib End measurement 12" below the starboard waterline
• Write this measurement into on your Dry-Dock Cover form

Distance from Bow of Frame to First Rib

• Start measuring on the bow of the frame
• Measure to the center joint of the fist rib
• Write this measurement in  on your Dry-Dock Cover form

Repeat Width of Dry-Dock Cover, Port to Starboard

• Repeat step seven for each rib
• Write each measurements in the corresponding on your Dry-Dock Cover form
• Continue until you have measured all ribs of the frame

• Continue measuring the distance from one rib to the next until all the distances are measured
• Write these measurements in the corresponding on your Dry-Dock Cover form

Forward Measurement, Ridgepole to Gunnel along first rib

• Measure along rib from ridgepole to gunnel
• Write measurement in on your Dry-Dock Cover form

Distance from Last Rib to the Stern

• Start measuring at the center joint of the last rib to the stern of the frame
  
• Write this measurement in the corresponding on your Dry-Dock Cover form

Midship Measurement, Ridgepole to Gunnel

• Measure along midship rib from ridgepole to gunnel
• Write measurement in on your Dry-Dock Cover form indicating rib number

Distance from Stern to 12" below Waterline

• Start measuring at the stern of the frame Measure to 12" below the stern waterline.
• Write this measurement in square on your Dry-Dock Cover form.

Aft Measurement, Ridgepole to Gunnel

• Measure along aft rib from ridgepole to gunnel
• Write Measurement in on your Dry-Dock Cover form

Ridgepole Length, Bow to Stern

• Start measuring from the bow of the frame
• Measure up and along the length of the ridgepole to the stern
• End your measurement at the stern of the frame
• Write the measurement in the marked Ridgepole Length on the Dry-Dock Cover form

page 8 of 9